Digi TransPort LR54, Руководство пользователя

Страница: 442 / 1113

Virtual Private Networks (VPN) IPsec
LR54 User Guide 442
n
RSA signature : Uses a private RSA key to authenticate with the remote peer.
i. For Private key , paste the device's private RSA key in PEM format.
ii. Type the Private key passphrase that is used to decrypt the private key.
Leave blank if the private key is not encrypted.
iii. For Peer public key , paste the peer's public RSA key in PEM format.
n
SCEP certificates : Uses Simple Certificate Enrollment Protocol (SCEP) to download
a private key, certificates, and an optional Certificate Revocation List (CRL) to the
LR54 device from a SCEP server.
You must create the SCEP client prior to configuring the IPsec tunnel. See Configure
a Simple Certificate Enrollment Protocol client for instructions.
i. For SCEP Client , select the SCEP client.
n X.509 certificate : Uses private key and X.509 certificates to authenticate with the
remote peer.
i. For Private key , paste the device's private RSA key in PEM format.
ii. Type the Private key passphrase that is used to decrypt the private key.
Leave blank if the private key is not encrypted.
iii. For Certificate , paste the local X.509 certificate in PEM format.
iv. For Peer verification, select either:
l
Peer certificate : For Peer certificate , paste the peer's X.509 certificate in
PEM format.
l
Certificate Authority : For Certificate Authority chain , paste the
Certificate Authority (CA) certificates. These must include all peer
certificates in the chain up to the root CA certificate, in PEM format.
16. (Optional) For Management Priority , set the management priority for this IPsec tunnel. A
tunnel that is up and has the highest priority will be used for central management and direct
device access.
17. (Optional) To configure the device to connect to its remote peer as an XAUTH client:
a. Click to expand XAUTH client .
b. Click Enable .
c. Type the Username and Password that the device will use to authenticate as an
XAUTH client with the peer.
18. (Optional) Click Enable MODECFG client to receive configuration information, such as the
private IP address, from the remote peer.
19. Click to expand Local endpoint .
a. For Type , select either:
n
Default route : Uses the same network interface as the default route.
n
Interface : Select the Interface to be used as the local endpoint.