Digi TransPort LR54 Скачать руководство пользователя страница 616

Страница: 616 / 1113

Services

Configure DNS

LR54 User Guide

616

4. Click

Access control list

to configure access control:

To limit access to specified IPv4 addresses and networks:

a. Click

IPv4 Addresses

b. For

Add Address

, click



c. For

Address

, enter the IPv4 address or network that can access the device's DNS

service. Allowed values are:

A single IP address or host name.

A network designation in CIDR notation, for example, 192.168.1.0/24.

any

: No limit to IPv4 addresses that can access the DNS service.

d. Click



again to list additional IP addresses or networks.

To limit access to specified IPv6 addresses and networks:

a. Click

IPv6 Addresses

b. For

Add Address

, click



c. For

Address

, enter the IPv6 address or network that can access the device's DNS

service. Allowed values are:

A single IP address or host name.

A network designation in CIDR notation, for example, 2001:db8::/48.

any

: No limit to IPv6 addresses that can access the DNS service.

d. Click



again to list additional IP addresses or networks.

To limit access to hosts connected through a specified interface on the LR54 device:

a. Click

Interfaces

b. For

Add Interface

, click



c. For

Interface

, select the appropriate interface from the dropdown.

d. Click



again to allow access through additional interfaces.

To limit access based on firewall zones:

a. Click

Zones

b. For

Add Zone

, click



c. For

Zone

, select the appropriate firewall zone from the dropdown.

See

Firewall configuration

for information about firewall zones.

d. Click



again to allow access through additional firewall zones.

5. (Optional)

Cache negative responses

is enabled by default. Disabling this option may improve

performance on networks with transient DNS results, when one or more DNS servers may have
positive results. To disable, click to toggle off

Cache negative responses

6. (Optional)

Query all servers

is enabled by default. This option is useful when only some DNS

servers will be able to resolve hostnames. To disable, click to toggle off

Query all servers

7. (Optional)

Rebind protection

, if enabled, prevents upstream DNS servers from returning

private IP addresses. To enable, click

Rebind protection

8. (Optional)

Allow localhost rebinding

is enabled by default if

Rebind protection

is enabled.

This is useful for Real-time Black List (RBL) servers.

9. (Optional) To add additional DNS servers:

Содержание TransPort LR54


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание TransPort LR54

Отзывы:

Похожие инструкции для TransPort LR54

Бренды по названию

Популярные бренды

Digi TransPort LR54, Руководство пользователя

Результаты поиска

Содержание TransPort LR54

Отзывы:

Похожие инструкции для TransPort LR54

Бренды по названию

Популярные бренды