Digi TransPort LR54, Руководство пользователя

Страница: 973 / 1113

Monitoring Enable the Wi-Fi scanner
LR54 User Guide 973
ipsec
loopback
setup
(config)>
Repeat this step to include additional firewall zones.
13. Confirm that users who will use the Wi-Fi scanner server are members of an authentication
group that has Wi-Fi scanner access enabled. See Add an authentication group for
authentication group configuration information.
14. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
15. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Display the output of the Wi-Fi scanner.
You can use one of the following methods to view the output of the Wi-Fi scanning service:
n
From the Status page of the WebUI.
n
From the System Logs page of the WebUI. You can also search the output, as well as
download the output in text format, from the System Logs page.
n
From the command line when logged into the LR54 device.
n
From a remote host, by connecting to the LR54 device by using the scanning service's SSH
port.
To view the output of the Wi-Fi scanning service, you must first enable the service. See Enable the Wi-
Fi scanner for instructions. For users to view the output of the Wi-Fi scanner, they must be a member
of an authentication group that has Wi-Fi scanner access enabled. See Add an authentication group
for authentication group configuration information.

Web
n
To view the output of the Wi-Fi scanning service from the Status page:
1. Log into the LR54 WebUI as a user with Admin access.
2. On the menu, select Status . In the Status menu, under Services , select Wi-Fi Scanner .
The Wi-Fi scanner page displays.
l
The output of the Wi-Fi scanning service is listed under Wi-Fi devices nearby .
l
If static transmitter filtering is enabled:
o
Devices that have been automatically determined to be stationary and therefore
filtered out of output log are listed under
Blocklisted static transmitters .
o
Devices that have not yet been filtered out but are being considered for
automatic blocklisting are listed under
Candidate static transmitters .