Digi TransPort LR54, Руководство пользователя

Страница: 169 / 1113

Interfaces Local Area Networks (LANs)
LR54 User Guide 169
e. Enable the Digi AP (Wi-Fi2) access point:
(config)> network wifi ap digi_ap2 enable true
(config)>
f. Set the SSID for the Digi AP (Wi-Fi2) access point:
(config)> network wifi ap digi_ap1 ssid Example2
(config)>
g. Set the password for the Digi AP (Wi-Fi2) access point:
(config)> network wifi ap digi_ap2 encryption key_psk2 password2
(config)>
9. Save the configuration and apply the change:
(config network bridge LAN2)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Task three: Verify the new configuration
The final step in this example is to verify the new configuration.
1. Connect an Ethernet cable from an internet-connected modem to WAN1 through the
WAN/ETH1 Ethernet port.
2. Verify that LAN1 is operating correctly:
a. Connect a device to LAN1 through the ETH2 Ethernet port, or by connecting to the Digi AP
(Wi-Fi1) access point.
b. Verify that the device has been provided an IP address from the LAN1 DHCP server in the
192.168.2.* subnet.
3. Verify that LAN2 is operating correctly:
a. Connect a device to LAN2 through the ETH3 Ethernet port, or by connecting to the Digi AP
(Wi-Fi2) access point.
b. Verify that the device has been provided an IP address from the LAN2 DHCP server in the
192.168.3.* subnet.
Show LAN status and statistics

Web
1. Log into the LR54 WebUI as a user with Admin access.
2. From the menu, click Status .
3. Under Networking , click Interfaces .