Digi TransPort LR54, Руководство пользователя

Страница: 497 / 1113

Virtual Private Networks (VPN) OpenVPN
LR54 User Guide 497
9. If Server managed certificates is not enabled:
a. Select the Authentication type:
n
Certificate only : Uses only certificates for client authentication. Each client
requires a public and private key.
n
Username/password only : Uses a username and password for client
authentication. You must create an OpenVPN authentication group and user. See
Configure an OpenVPN Authentication Group and User for instructions.
n Certificate and username/password : Uses both certificates and a username and
password for client authentication. Each client requires a public and private key,
and you must create an OpenVPN authentication group and user. See
Configure an
OpenVPN Authentication Group and User for instructions.
b. Paste the contents of the CA certificate (usually in a ca.crt file), the Public key (for
example, server.crt), the Private key (for example, server.key), and the Diffie Hellman
key (usually in dh2048.pem) into their respective fields. The contents will be hidden when
the configuration is saved.
10. (Optional) Click to expand Access control list to restrict access to the OpenVPN server:
n
To limit access to specified IPv4 addresses and networks:
a. Click IPv4 Addresses .
b. For Add Address , click

.
c. For Address , enter the IPv4 address or network that can access the device's
service-type. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 192.168.1.0/24.
l
any : No limit to IPv4 addresses that can access the service-type.
d. Click

again to list additional IP addresses or networks.
n
To limit access to specified IPv6 addresses and networks:
a. Click IPv6 Addresses .
b. For Add Address , click

.
c. For Address , enter the IPv6 address or network that can access the device's
service-type. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 2001:db8::/48.
l
any : No limit to IPv6 addresses that can access the service-type.
d. Click

again to list additional IP addresses or networks.
n
To limit access to hosts connected through a specified interface on the LR54 device:
a. Click Interfaces .
b. For Add Interface , click

.
c. For Interface , select the appropriate interface from the dropdown.
d. Click

again to allow access through additional interfaces.
n To limit access based on firewall zones:
a. Click Zones .
b. For Add Zone , click

.