Digi TransPort LR54, Руководство пользователя

Страница: 170 / 1113

Interfaces Local Area Networks (LANs)
LR54 User Guide 170

Command line
1. Select the device in Remote Manager and click Actions > Open Console , or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. Enter the show network command at the Admin CLI prompt:
> show network
Interface Proto Status Address
---------------- ----- ------- -------------------------------
defaultip IPv4 up 192.168.210.1/24
defaultlinklocal IPv4 up 169.254.100.100/16
lan1 IPv4 up 192.168.2.1/24
lan1 IPv6 up fd00:2704::1/48
loopback IPv4 up 127.0.0.1/8
wan1 IPv4 up 10.10.10.10/24
wan1 IPv6 up fe00:2404::240:f4ff:fe80:120/64
wwan IPv4 up 10.200.1.101/30
wwan IPv6 down
>
3. Additional information can be displayed by using the show network verbose command:
> show network verbose
Interface Proto Status Type Zone Device Metric
Weight
---------------- ----- ------- ------ -------- -------- ------ --
----
defaultip IPv4 up static setup lan1 10 10
defaultlinklocal IPv4 up static setup lan1 0 10
lan1 IPv4 up static internal lan1 5 10
lan1 IPv6 up static internal lan1 5 10
loopback IPv4 up static loopback loopback 0 10
wan1 IPv4 up dhcp external wan1 1 10
wan1 IPv6 up dhcp external wan1 1 10
wwan IPv4 up modem external wwan1 3 10
wwan IPv6 down modem external wwan1 3 10
>
4. Enter show network interface name at the Admin CLI prompt to display additional
information about a specific LAN. For example, to display information about LAN1, enter show
network interface lan1 :
> show network interface lan1
lan1 Interface Status