Digi TransPort LR54, Руководство пользователя

Страница: 278 / 1113

Wi-Fi Configure a Wi-Fi access point with personal security
LR54 User Guide 278
4. Create a new access point or modify an existing access point:
n
To create a new access point, for Add WiFi access point: , type a name for the access
point and click

.
n
To modify an existing access point, click to expand the access point.
The Wi-Fi access point configuration window is displayed.
5. For SSID , type the SSID. Up to 32 characters are allowed.
6. Enable SSID broadcast to configure the radio to broadcast the SSID.
7. (Optional) Enable Isolate clients to prevent clients that are connected to this access point
from communicating with each other. See Isolate Wi-Fi clients for information about how to
prevent clients connected to different access points from communicating with each other.
8. For Encryption , select one of the following:
n
WPA Personal (PSK) : All Wi-Fi clients must support WPA to be able to authenticate.
n
WPA/WPA2 Personal (PSK) : Wi-Fi clients that support WPA and WPA2 are able to
authenticate.
n
WPA2 Personal (PSK) : All Wi-Fi clients must support WPA2 to be able to authenticate.
n
WPA2-PSK/WPA3-SAE mixed mode : Wi-Fi clients that support WPA2 and WPA3 are able
to authenticate.
n
WPA3 Personal (SAE) : All Wi-Fi clients must support WPA3 to be able to authenticate.
Note Only select WPA3 Personal (SAE) if you know that all Wi-Fi clients connecting to
this device will have WPA3 capabilities.
9. For Pre-shared key , enter the password that clients will use when connecting to the access
point.
10. (Optional) For Group rekey interval , type the amount of time to wait before changing the
group key.
The group key is shared by all in clients of the access point, and after a client has
disconnected, it will be able to use the group key to decrypt broadcast packets until the key is
changed.