Digi TransPort LR54, Руководство пользователя

Страница: 255 / 1113

Serial port Show serial status and statistics
LR54 User Guide 255
4. Set the stop bits used by the device to which you want to connect:
(config)>path-paramstopbits bits
(config)>
5. Set the type of flow control used by the device to which you want to connect:
(config)>path-paramflow value
(config)>
where value is one of:
n
none
n
rts/cts
n
xon/xoff
7. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Show serial status and statistics
To show the status and statistics for the serial port:

Web
1. Log into the LR54 WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Connections , click Serial .

Command line
1. Select the device in Remote Manager and click Actions > Open Console , or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. Use the show serial command:
> show serial
Label Port Enable Mode Baudrate
-------- ----- ------ ----- --------
Serial 1 port1 true login 115000
>