Digi TransPort LR54, Руководство пользователя

Страница: 842 / 1113

User authentication Example user configuration
LR54 User Guide 842
In this example:
n
The user's username is admin1 .
n
The user's password is password1 .
n The authentication group on the LR54 device, admin , is identified in the Unix-FTP-
Group-Names parameter.
c. Save and close the users file.
2. Configure a user on the server:
a. On the ubuntu machine hosting the server, open the /etc//tac_plus.conf
file:
$ sudo gedit /etc//tac_plus.conf
b. Add a user to the tac_plus.conf file:
user = admin1 {
name ="Admin1 for TX64"
pap = cleartext password1
service = system {
groupname = admin
}
}
}
In this example:
n
The user's username is admin1 .
n
The user's password is password1 .
n
The authentication group on the LR54 device, admin , is identified in the
groupname parameter.
c. Save and close the tac_plus.conf file.
3. Select the device in Remote Manager and click Actions > Open Console , or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
4. At the command line, type config to enter configuration mode:
> config
(config)>
5. Configure the authentication methods:
a. Determine the current authentication method configuration:
(config)> show auth method
0 local
(config)>
This output indicates that on this example system, only local authentication is configured.