Digi TransPort LR54, Руководство пользователя

Страница: 652 / 1113

Services Location information
LR54 User Guide 652
The default is 1m (one minute).
5. Set the boundary type for the geofence:
(config service location geofence test_geofence)> boundary value
(config service location geofence test_geofence)>
where value is either circular or polygonal .
n
If boundary is set to circular :
a. Set the latitude and longitude of the center point of the circle:
(config service location geofence test_geofence)> center
latitude
int
(config service location geofence test_geofence)> center
longitude
int
(config service location geofence test_geofence)>
where int is:
l
For latitude , any integer between -90 and 90 , with up to six decimal places.
l
For longitude , any integer between -180 and 180 , with up to six decimal
places.
b. Set the radius of the circle:
(config service location geofence test_geofence)> radius radius
(config service location geofence test_geofence)>
where radius is an integer followed by m or km , for example, 100m or 1km .
n
If boundary is set to polygonal :
a. Set the coordinates of one vertex of the polygon. A vertex is the point at which two
sides of a polygon meet.
i. Add a vertex:
(config service location geofence test_geofence)> add
coordinates end
(config service location geofence test_geofence coordinates
0)>
ii. Set the latitude and longitude of the vertex:
(config service location geofence test_geofence coordinates
0)> latitude
int
(config service location geofence test_geofence coordinates
0)> longitude
int
(config service location geofence test_geofence coordinates
0)>
where int is:
l
For latitude , any integer between -90 and 90 , with up to six decimal
places.