Digi TransPort LR54, Руководство пользователя

Страница: 668 / 1113

Services Modbus gateway
LR54 User Guide 668
where value is any number between 10 milliseconds and one second, and take
the format number {ms|s} .
For example, to set idle_gap to 20 milliseconds, enter 20ms .
v. Set the amount of time to wait before disconnecting the socket when it has
become inactive:
(config service modbus_gateway server test_modbus_server)>
inactivity_timeout
value
(config service modbus_gateway server test_modbus_server)>
where value is any number of minutes or seconds up to a maximum of 15
minutes, and takes the format number { m|s }.
For example, to set inactivity_timeout to ten minutes, enter either 10m or
600s :
(config service modbus_gateway server test_modbus_server)>
inactivity_timeout 600s
(config service modbus_gateway server test_modbus_server)>
n
If connection_type is set to serial :
i. Set the serial port:
i. Use the ? to determine available serial ports:
(config service modbus_gateway server test_modbus_
server)> ... serial port ?
Serial
Additional Configuration
-------------------------------------------------------
------------------------
port1 Port 1
(config service modbus_gateway server test_modbus_
server)>
ii. Set the port:
(config service modbus_gateway server test_modbus_
server)> serial
port
(config service modbus_gateway server test_modbus_
server)>
ii. Set the packet mode:
(config service modbus_gateway server test_modbus_server)>
serial packet_mode
value
(config service modbus_gateway server test_modbus_server)>
where value is either rtu or ascii . The default is rtu .