Delta VFD-E Series, Руководство пользователя

Страница: 64 / 435

Chapter 4 Parameters 
4-9
Parameter Explanation Settings
Factory
Setting
Customer

02.11
Keypad Frequency
Command
0.00 to 599.00Hz
60.00

02.12
Communication
Frequency
Command 0.00 to 599.00Hz
60.00
02.13
The Selections for
Saving Keypad or
Communication
Frequency
Command
0: Save Keypad & Communication
Frequency
1: Save Keypad Frequency only
2: Save Communication Frequency only
0
02.14
Initial Frequency
Selection (for
keypad &
RS485/USB)
0: by Current Freq Command
0 1: by Zero Freq Command
2: Refer to Pr.02-15 to set up
02.15
Initial Frequency Set
point (for keypad &
RS485/USB)
0.00 ~ 599.00Hz
60.00
02.16
Display the Master
Freq Command
Source
Read Only
Bit0=1: by First Freq Source (Pr.02.00)
Bit1=1: by Second Freq Source (Pr.02.09)
Bit2=1: by Multi-input function
Bit3=1: by PLC Freq command (NOT for
VFD*E*C models)
1
02.17
Display the
Operation
Command Source
Read Only
Bit0=1: by Digital Keypad
Bit1=1: by RS485 communication
Bit2=1: by External Terminal 2/3 wire mode
Bit3=1: by Multi-input function
Bit4=1: by PLC Operation Command (NOT
for VFD*E*C models)
Bit5=1: by CANopen communication
4
02.18
Selection of Carrier
Modulation
0: by carrier modulation of load current and
temperature
1: by carrier modulation of load current
0
02.19
Selection of Zero
speed control mode
0: Enter standby mode when zero speed
1: Run DC brake when zero speed(the max.
output voltage *0.05 )
0