Delta ASD-A2R-0121 Series, Руководство пользователя

Страница: 204 / 660

Chapter 7 Motion Control

ASDA-A2R Series
7-10 Revision December, 2014
Write via panel: It cannot be written via panel.
------------------------------------------------------------------------------
Read via communication: After reading the content of
P5-11, the value of P5-11 will
increase 1 automatically.
Write via communication: After writing the content of P5-11,
the value of P5-11 will increase 1
automatically.
Set the desired reading / writing address via P5-11 first. Then, read / write P5-12 or
P5-13 in order to access the content of data array. If users desire to continuously write 3
data, 100, 200, 300 into the address of data array, 11, 12 and 13, the operation step is
as follows:
A . Write via panel: Use P5-12 (reading / writing window #1), since P5-13 does not
support writing via panel:
1. Set address: Set P5-11 to 11 (The first written address)
2. Write into data: Set P5-12 to 100 (After writing 100 into address 11 in data array, the
value of P5-11 will increase 1 automatically.)
Set P5-12 to 200 (After writing 200 into address 12 in data array, the
value of P5-11 will increase 1 automatically.)
Set P5-12 to 300 (After writing 300 into address 13 in data array, the
value of P5-11 will increase 1 automatically.)
The last step is to read address 11, 12 and 13 and check if the content is the value that
just wrote into.
B . Read via panel: Use P5-13 (reading / writing window #2) so as to continuously read
the content.
1. Set address: Set P5-11 to 11 (The first read address)
2. Read the data: When the panel displays P5-13,
Press the SET Key for the first time and show the content of address
11. Then, press the MODE Key to exit.
Press the SE T Key for the second time and show the content of
address 12. Then, press the MODE Key to exit.
Press the SET Key for the second time and show the content of
address 13. Then, press the MODE Key to exit.
Note: Every time when reading the data via P5-13, the value of P5-11
will increase 1 automatically. Thus the user could continuously
read the data.
If reading the data via P5-12, then the value of P5-11 will not
change. The user is unable to read the next data automatically.
If users desire to read / write the data array via communication, the operation procedure
is similar to panel. Moreover, the function of P5-12 and P5-13 is the same. If users
desire to write 6 data, 100, 200, 300, 400, 500 and 600 into the address of data array
via Modbus communication command 0x10 (continuous writing), the content of the
issued command is as the followings: