Delta ASD-A2R-0121 Series, Руководство пользователя

Страница: 131 / 660

Chapter 5 Trial Operation and Tuning

ASDA-A2R Series
Revision December, 2014 5-3
1) When the screen displays
Warning of overvoltage:
It means the voltage input by the main circuit is higher than the rated voltage or power
input error (incorrect power system).
Corrective action:

Use the voltmeter to measure if the input voltage from the main circuit is within the
range of rated voltage value.

Use the voltmeter to measure if the power system complies with the specification.
2) When the screen displays
Warning of encoder error:
Check if the motor encoder is securely connected or the wiring is correct.
Corrective action:

Check if the wiring is the same as the instruction of the user manual.

Check the encoder connector.

Check if the wiring is loose.

Encoder is damaged.
3) When the screen displays
Warning of emergency stop:
Please check if any of the digital input DI1~DI8 is set to emergency stop (EMGS).
Corrective action:

If not desire to set emergency stop (EMGS) as one of the digital input, make sure
no digital input is set to emergency stop (EMGS) among DI1~DI8. (That is to say
none of the parameters, P2-10~P2-17 is set to 21.)

If the signal of emergency stop (EMGS) is needed, make sure one of the digital
input, DI1~DI8, is set to emergency stop (EMGS) and that DI has to be ON.
4) When the screen displays