manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 950

•

VXLAN Hypervisor

•

Service Node (SN)

•

Legacy TOR

Network 
Virtualization 
Platform (NVP) 
Controller

NVP Controller is the network controller for managing cloud components. The OVSDB protocol is the 
protocol used for communication between VTEPs and the controller. In the current release, the qualified

 

controller for the VXLAN Gateway function is NSX-from VMWare. The top-level functions of NVP are:

•

Provide a GUI for creating service gateways.

•

Manage the VTEPs.:

– Binds Port and VLAN

– Install VTEP tunnels

•

Distribute the VTEPs to MAC binding to all relevant VTEPs.

•

Provide an interface for cloud orchestration in cloud data center management.

VTEP (VXLAN 
Tunnel End Point)

VTEPs work as the open vSwitch running on the hypervisor on a virtualized server or as the VXLAN 
Gateway or as the Service Node (SN) that is responsible for flooding. The VTEPs are responsible for 
encapsulation and decapsulation of VXLAN headers.

VXLAN Gateways

VXLAN Gateways act as the VTEPs that encapsulate and decapsulate VXLAN headers. The roles and 
responsibilities of the Gateway are:

•

Connects to the NVP client based on user configuration.

•

Advertises south-facing VXLAN capable ports to the NVP client.

•

Creates logical networks based on messages from the NVP.

•

Creates tunnels to VTEPs based on messages from the NVP.

•

Binds the Port and VLAN to logical networks based on messages from the NVP.

•

Binds MACs to the VTEP and logical network based on messages from the NVP.

•

Advertises MACs learnt on south-facing VXLAN capable-ports to the NVP client.

VXLAN Hypervisor

It is the VTEP that connects the Virtual Machines (VM) to the underlay legacy network to the physical 
infrastructure.

Service Node(SN)

It is also another VTEP, but it is fully managed by NSX. The purpose of SN is to be the central replication 
engine for flooded packets

Legacy TOR

It is a TOR switch, which performs routing or switching decisions.

Functional Overview of VXLAN Gateway

The following section is the functional overview of VXLAN Gateway:

1.

Provides connectivity between a Virtual server infrastructure and a Physical server infrastructure.

2.

Provides the functions performed by a VTEP in a virtual server infrastructure. The functions of a VTEP are:

•

VTEP is responsible for creating one or more logical networks.

•

VTEP is responsible for identifying and binding a Port and VLAN to a logical network

•

VTEP maintains MAC bindings to a VTEP.

•

VTEP is typically managed by a network orchestrator. When the device functions as VTEP, VXLAN from VMWare is the 
network orchestrator.

950

Virtual Extensible LAN (VXLAN)

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды