manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 752

Specifying an SSH Version

The following example uses the 

ip ssh server version 2

 command to enable SSH version 2 and the 

show ip ssh 

command to confirm the setting.

Dell(conf)#ip ssh server version 2

Dell(conf)#do show ip ssh

SSH server                : enabled.

SSH server version        : v2.

SSH server vrf            : default.

SSH server ciphers        : 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-

ctr,aes256-ctr.

SSH server macs           : hmac-md5,hmac-md5-96,hmac-sha1,hmac-sha1-96,hmac-sha2-256,hmac-

sha2-256-96.

SSH server kex algorithms : diffie-hellman-group-exchange-sha1,diffie-hellman-group1-

sha1,diffie-hellman-group14-sha1.

Password Authentication   : enabled.

Hostbased Authentication  : disabled.

RSA       Authentication  : disabled.

   Vty          Encryption      HMAC            Remote IP

Dell(conf)#

To disable SSH server functions, use the 

no ip ssh server enable

 command.

Using SCP with SSH to Copy a Software Image

To use secure copy (SCP) to copy a software image through an SSH connection from one switch to another, use the following 
commands.

1.

On Switch 1, set the SSH port number ( port 22 by default).
CONFIGURATION MODE

ip ssh server port number 

2.

On Switch 1, enable SSH.
CONFIGURATION MODE

copy ssh server enable

3.

On Switch 2, invoke SCP.
CONFIGURATION MODE

copy scp: flash:

4.

On Switch 2, in response to prompts, enter the path to the desired file and enter the port number specified in Step 1.
EXEC Privilege Mode

5.

On the chassis, invoke SCP.
CONFIGURATION mode

copy scp: flash:

Example of Using SCP to Copy from an SSH Server on Another Switch

The following example shows the use of SCP and SSH to copy a software image from one switch running SSH server on UDP port 
99 to the local switch.
Other SSH related command include:

•

crypto key generate

 : generate keys for the SSH server.

•

debug ip ssh

 : enables collecting SSH debug information.

•

ip scp topdir

 : identify a location for files used in secure copy transfer.

•

ip ssh authentication-retries

 : configure the maximum number of attempts that should be used to authenticate a 

user.

•

ip ssh connection-rate-limit

 : configure the maximum number of incoming SSH connections per minute.

752

Security

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды