manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 703

CONFIGURATION mode

Dell(conf)# interface fo 1/4 

INTERFACE mode

Dell(conf-if-fo-1/4)# ip address 90.1.1.1/16 

2.

Configure a Layer 2 QoS policy with Layer 2 (Dot1p or source MAC-based) match criteria.
CONFIGURATION mode

Dell(conf)# policy-map-input l2p layer2 

3.

Apply the Layer 2 policy on a Layer 3 interface.
INTERFACE mode

Dell(conf-if-fo-1/4)# service-policy input l2p layer2

Applying DSCP and VLAN Match Criteria on a Service Queue

You can configure Layer 3 class maps which contain both a Layer 3 Differentiated Services Code Point (DSCP) and IP VLAN IDs as 
match criteria to filter incoming packets on a service queue on the switch.
To configure a Layer 3 class map to classify traffic according to both an IP VLAN ID and DSCP value, use the 

match ip vlan 

vlan-id

 command in class-map input configuration mode. You can include the class map in a policy map, and apply the class and 

policy map to a service queue using the 

service-queue

 command. In this way, the system applies the match criteria in a class 

map according to queue priority (queue numbers closer to 0 have a lower priority).

To configure IP VLAN and DSCP match criteria in a Layer 3 class map, and apply the class and policy maps to a service queue:

1.

Create a match-any or a match-all Layer 3 class map, depending on whether you want the packets to meet all or any of the 
match criteria. By default, a Layer 3 class map is created if you do not enter the 

layer2

 option with the class-map command. 

When you create a class map, you enter the class-map configuration mode.
CONFIGURATION mode

Dell(conf)#class-map match-all pp_classmap

2.

Configure a DSCP value as a match criterion.
CLASS-MAP mode

Dell(conf-class-map)#match ipdscp 5

3.

Configure an IP VLAN ID as a match criterion.
CLASS-MAP mode

Dell(conf-class-map)#match ip vlan 5

4.

Create a QoS input policy.
CONFIGURATION mode

Dell(conf)#qos-policy-input pp_qospolicy

5.

Configure the DSCP value to be set on matched packets.
QOS-POLICY-IN mode

Dell(conf-qos-policy-in)#set ip-dscp 5

6.

Create an input policy map.
CONFIGURATION mode

Dell(conf)#policy-map-input pp_policmap 

7.

Create a service queue to associate the class map and QoS policy map.

Quality of Service (QoS)

703

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды