manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 887

60

Virtual LANs (VLANs)

Virtual LANs (VLANs) are a logical broadcast domain or logical grouping of interfaces in a local area network (LAN) in which all data 
received is kept locally and broadcast to all members of the group.
When in Layer 2 mode, VLANs move traffic at wire speed and can span multiple devices. The system supports up to 4093 port-
based VLANs and one default VLAN, as specified in IEEE 802.1Q.

VLANs benefits include:

•

Improved security because you can isolate groups of users into different VLANs

•

Ability to create one VLAN across multiple devices

For more information about VLANs, refer to the 

IEEE Standard 802.1Q Virtual Bridged Local Area Networks

. In this guide, also refer 

to:

•

Bulk Configuration

 in the 

Interfaces

 chapter.

•

VLAN Stacking

 in the 

Service Provider Bridging

 chapter.

For a complete listing of all commands related to Dell Networking OS VLANs, refer to these 

Dell Networking OS Command 

Reference Guide

 chapters:

•

Interfaces

•

802.1X

•

GARP VLAN Registration Protocol (GVRP)

•

Service Provider Bridging

•

Per-VLAN Spanning Tree Plus (PVST+)

The following table lists the defaults for VLANs in Dell Networking OS.

Feature

Default

Spanning Tree group 
ID

All VLANs are part of Spanning Tree group 0.

Mode

Layer 2 (no IP address is assigned).

Default VLAN ID

VLAN 1

 

Default VLAN

When you configure interfaces for Layer 2 mode, they are automatically placed in the Default VLAN as untagged interfaces. Only 
untagged interfaces can belong to the Default VLAN.

The following example displays the outcome of placing an interface in Layer 2 mode. To configure an interface for Layer 2 mode, use 
the 

switchport

 command. As shown in bold, the 

switchport

 command places the interface in Layer 2 mode and the 

show 

vlan

 command in EXEC privilege mode indicates that the interface is now part of the Default VLAN (VLAN 1).

By default, VLAN 1 is the Default VLAN. To change that designation, use the 

default vlan-id

 command in CONFIGURATION 

mode. You cannot delete the Default VLAN.

Virtual LANs (VLANs)

887

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды