manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 49

Example of Copying a File to an FTP Server

Dell#copy flash://Dell-EF-8.2.1.0.bin ftp://myusername:[email protected]/

/Dell/Dell-EF-8.2.1.0

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

27952672 bytes successfully copied

Example of Importing a File to the Local System

core1#$//copy ftp://myusername:[email protected]//Dell/

Dell-EF-8.2.1.0.bin flash://

Destination file name [Dell-EF-8.2.1.0.bin.bin]:

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

26292881 bytes successfully copied

Mounting an NFS File System

This feature enables you to quickly access data on an NFS mounted file system. You can perform file operations on an NFS mounted 
file system using supported file commands.

This feature allows an NFS mounted device to be recognized as a file system. This file system is visible on the device and you can 
execute all file commands that are available on conventional file systems such as a Flash file system.

Before executing any CLI command to perform file operations, you must first mount the NFS file system to a mount-point on the 
device. Since multiple mount-points exist on a device, it is mandatory to specify the mount-point to which you want to load the 
system. The 

/f10/mnt/nfs

directory is the root of all mount-points.

To mount an NFS file system, perform the following steps:

Table 4. Mounting an NFS File System

File Operation

Syntax

To mount an NFS file system:

mount nfs 

rhost:path

 

mount-

point

 username password

The foreign file system remains mounted as long as the device is up and does not reboot. You can run the file system commands 
without having to mount or un-mount the file system each time you run a command. When you save the configuration using the 

write

 command, the 

mount

 command is saved to the startup configuration. As a result, each time the device re-boots, the NFS 

file system is mounted during start up.

Table 5. Forming a 

copy

 Command

Location

source-file-url

 Syntax

destination-file-url

 Syntax

For a remote file location:
NFS File System

copy nfsmount://{<mount-
point>}/filepath/filename} 
username:password

tftp:

//{hostip | hostname}/

filepath/filename

Important Points to Remember

•

You cannot copy a file from one remote system to another.

•

You cannot copy a file from one location to the same location.

•

When copying to a server, you can only use a hostname if a domain name server (DNS) server is configured.

Example of Copying a File to current File System

Dell#copy tftp://10.16.127.35/mashutosh/dv-maa-s4810-test nfsmount://

Destination file name [dv-maa-s4810-test]:

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!.!

44250499 bytes successfully copied

Dell#

Dell#copy ftp://10.16.127.35 nfsmount:

Getting Started

49

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды