manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 260

DCBx Port Roles

To enable the auto-configuration of DCBx-enabled ports and propagate DCB configurations learned from peer DCBx devices 
internally to other switch ports, use the following DCBx port roles.

Auto-upstream

The port advertises its own configuration to DCBx peers and is 

willing

 to receive peer configuration. The 

port also propagates its configuration to other ports on the switch.
The first auto-upstream that is capable of receiving a peer configuration is elected as the configuration

 

source. The elected configuration source then internally propagates the configuration to other auto-
upstream and auto-downstream ports. A port that receives an internally propagated configuration

 

overwrites its local configuration with the new parameter values. When an auto-upstream port (besides the 
configuration source) receives and overwrites its configuration with internally propagated information, one of 
the following actions is taken:

•

If the peer configuration received is compatible with the internally propagated port configuration, the link 

with the DCBx peer is enabled.

•

If the received peer configuration is not compatible with the currently configured port configuration, the 

link with the DCBx peer port is disabled and a syslog message for an incompatible configuration is 

generated. The network administrator must then reconfigure the peer device so that it advertises a 

compatible DCB configuration.

– The configuration received from a DCBx peer or from an internally propagated configuration is not 

stored in the switch’s running configuration.

– On a DCBx port in an auto-upstream role, the PFC and application priority TLVs are enabled. ETS 

recommend TLVs are disabled and ETS configuration TLVs are enabled.

Auto-downstream

The port advertises its own configuration to DCBx peers but is 

not willing

 to receive remote peer 

configuration. The port always accepts internally propagated configurations from a configuration source. An 
auto-downstream port that receives an internally propagated configuration overwrites its local configuration

 

with the new parameter values.
When an auto-downstream port receives and overwrites its configuration with internally propagated 
information, one of the following actions is taken:

•

If the peer configuration received is compatible with the internally propagated port configuration, the link 

with the DCBx peer is enabled.

•

If the received peer configuration is not compatible with the currently configured port configuration, the 

link with the DCBx peer port is disabled and a syslog message for an incompatible configuration is 

generated. The network administrator must then reconfigure the peer device so that it advertises a 

compatible DCB configuration.

– The internally propagated configuration is not stored in the switch's running configuration.
– On a DCBx port in an auto-downstream role, all PFC, application priority, ETS recommend, and ETS 

configuration TLVs are enabled.

Configuration source The port is configured to serve as a source of configuration information on the switch. Peer DCB 

configurations received on the port are propagated to other DCBx auto-configured ports. If the peer 
configuration is compatible with a port configuration, DCBx is enabled on the port.
On a configuration-source port, the link with a DCBx peer is enabled when the port receives a DCB 
configuration that can be internally propagated to other auto-configured ports. The configuration received 
from a DCBx peer is not stored in the switch’s running configuration. On a DCBx port that is the 
configuration source, all PFC and application priority TLVs are enabled. ETS recommend TLVs are disabled 
and ETS configuration TLVs are enabled.

Manual

The port is configured to operate only with administrator-configured settings and does not auto-configure 
with DCB settings received from a DCBx peer or from an internally propagated configuration from the 
configuration source. If you enable DCBx, ports in Manual mode advertise their configurations to peer 

260

Data Center Bridging (DCB)

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды