Dell S4048-ON, Руководство по настройке

Страница: 501 / 1039

Figure 80. LLDP-MED Capabilities TLV
Table 54. Dell Networking OS LLDP-MED Capabilities
Bit Position TLV Dell Networking OS Support
0 LLDP-MED Capabilities Yes
1 Network Policy Yes
2 Location Identification Yes
3 Extended Power via MDI-PSE Yes
4 Extended Power via MDI-PD No
5 Inventory No
6–15 reserved No
Table 55. LLDP-MED Device Types
Value Device Type
0 Type Not Defined
1 Endpoint Class 1
2 Endpoint Class 2
3 Endpoint Class 3
4 Network Connectivity
5–255 Reserved
LLDP-MED Network Policies TLV
A network policy in the context of LLDP-MED is a device’s VLAN configuration and associated Layer 2 and Layer 3 configurations.
LLDP-MED network policies TLV include:
• VLAN ID
• VLAN tagged or untagged status
• Layer 2 priority
• DSCP value
An integer represents the application type (the Type integer shown in the following table), which indicates a device function for
which a unique network policy is defined. An individual LLDP-MED network policy TLV is generated for each application type that
you specify with the Dell Networking OS CLI (
Advertising TLVs ).
NOTE: As shown in the following table, signaling is a series of control packets that are exchanged between an endpoint
device and a network connectivity device to establish and maintain a connection. These signal packets might require a
different network policy than the media packets for which a connection is made. In this case, configure the signaling
application.
Link Layer Discovery Protocol (LLDP)
501