manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 745

RADIUS Authentication

Dell Networking OS supports RADIUS for user authentication (text password) at login and can be specified as one of the login 
authentication methods in the 

aaa authentication login

 command.

When configuring AAA authorization, you can configure to limit the attributes of services available to a user. When you enable 
authorization, the network access server uses configuration information from the user profile to issue the user's session. The user’s 
access is limited based on the configuration attributes. RADIUS exec-authorization stores a user-shell profile and that is applied 
during user login. You may name the relevant named-lists with either a unique name or the default name. When you enable 
authorization by the RADIUS server, the server returns the following information to the client:

•

Idle Time

•

ACL Configuration Information

•

Auto-Command

•

Privilege Levels

After gaining authorization for the first time, you may configure these attributes.

NOTE: RADIUS authentication/authorization is done for every login. There is no difference between first-time login and 
subsequent logins.

Idle Time

Every session line has its own idle-time. If the idle-time value is not changed, the default value of 

30 minutes

 is used.

RADIUS specifies idle-time allow for a user during a session before timeout. When a user logs in, the lower of the two idle-time 
values (configured or default) is used. The idle-time value is updated if both of the following happens:

•

The administrator changes the idle-time of the line on which the user has logged in.

•

The idle-time is lower than the RADIUS-returned idle-time.

ACL Configuration Information

The RADIUS server can specify an ACL. If an ACL is configured on the RADIUS server, and if that ACL is present, the user may be 
allowed access based on that ACL.

If the ACL is absent, authorization fails, and a message is logged indicating this.
RADIUS can specify an ACL for the user if both of the following are true:

•

If an ACL is absent.

•

If there is a very long delay for an entry, or a denied entry because of an ACL, and a message is logged.

NOTE: The ACL name must be a string. Only standard ACLs in authorization (both RADIUS and TACACS) are supported. 
Authorization is denied in cases using Extended ACLs.

Auto-Command

You can configure the system through the RADIUS server to automatically execute a command when you connect to a specific line.
The 

auto-command

 command is executed when the user is authenticated and before the prompt appears to the user.

•

Automatically execute a command.

auto-command

Privilege Levels

Through the RADIUS server, you can configure a privilege level for the user to enter into when they connect to a session.
This value is configured on the client system.

•

Set a privilege level.

privilege level

Security

745

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды