Dell S4048-ON, Руководство по настройке

Страница: 764 / 1039

If you add or delete command permissions using the
role
command, those changes only apply to the specific user role. They do not
apply to other roles that have inheritance from that role. Authorization and accounting only apply to the roles specified in that
configuration.
When you modify a command for a role, you specify the role, the mode, and whether you want to restrict access using the
deleterole keyword or grant access using the addrole keyword followed by the command you are controlling access. For
information about how to create new roles, see also Creating a New User Role.
The following output displays the modes available for the
role
command.
Dell (conf)#role ?
configure Global configuration mode
exec Exec Mode
interface Interface configuration mode
line Line Configuration mode
route-map Route map configuration mode
router Router configuration mode
Examples: Deny Network Administrator from Using the show users Command.
The following example denies the
netadmin
role from using the
show users
command and then verifies that
netadmin
cannot
access the
show users
command in exec mode. Note that the
netadmin
role is not listed in the
Role access:
secadmin,sysadmin
, which means the
netadmin
cannot access the
show users
command.
Dell(conf)#role exec deleterole netadmin show users
Dell#show role mode exec show users
Role access: secadmin,sysadmin
Example: Allow Security Administrator to Configure Spanning Tree
The following example allows the security administrator (secadmin) to configure the spanning tree protocol. Note command is
protocol spanning-tree.
Dell(conf)#role configure addrole secadmin protocol spanning-tree
Example: Allow Security Administrator to Access Interface Mode
The following example allows the security administrator (
secadmin
) to access Interface mode.
Dell(conf)#role configure addrole secadmin ?
LINE Initial keywords of the command to modify
Dell(conf)#role configure addrole secadmin interface
Example: Allow Security Administrator to Access Only 10-Gigabit Ethernet Interfaces
The following example allows the security administrator (
secadmin
) to only access 10-Gigabit Ethernett interfaces and then shows
that the
secadmin
, highlighted in bold, can now access Interface mode. However, the
secadmin
can only access 10-Gigabit
Ethernet interfaces.
Dell(conf)#role configure addrole secadmin ?
LINE Initial keywords of the command to modify
Dell(conf)#role configure addrole secadmin interface tengigabitethernet
Dell(conf)#show role mode configure interface
Role access: netadmin, secadmin , sysadmin
Example: Verify that the Security Administrator Can Access Interface Mode
The following example shows that the
secadmin
role can now access Interface mode (highlighted in bold).
Role Inheritance Modes
netoperator
netadmin Exec Config Interface Router IP RouteMap Protocol MAC
764
Security