Dell S4048-ON, Руководство по настройке

Страница: 461 / 1039

redistribute {bgp as-number | connected | rip | static} [level-1 level-1-2 | level-2]
[metric metric-value ] [metric-type {external | internal}] [route-map map-name ]
Configure the following parameters:
–
level-1
,
level-1-2
, or
level-2
: assign all redistributed routes to a level. The default is level-2 .
–
metric-value
: the range is from 0 to 16777215. The default is 0 .
– metric-type : choose either external or internal. The default is internal .
–
map-name
: enter the name of a configured route map.
• Include specific OSPF routes in IS-IS.ROUTER ISIS mode
redistribute ospf process-id [level-1| level-1-2 | level-2] [metric value ] [match
external {1 | 2} | match internal] [metric-type {external | internal}] [route-map map-
name ]
Configure the following parameters:
–
process-id
: the range is from 1 to 65535.
–
level-1
,
level-1-2
, or
level-2
: assign all redistributed routes to a level. The default is level-2 .
–
metric value
: the range is from 0 to 16777215. The default is 0 .
–
metric value
: the range is from 0 to 16777215. The default is 0 .
–
match external
: the range is 1 or 2.
– match internal
–
metric-type
: external or internal.
–
map-name
: name of a configured route map.
To view the IS-IS configuration globally (including both IPv4 and IPv6 settings), use the
show running-config isis
command
in EXEC Privilege mode. To view the current IPv4 IS-IS configuration, use the
show config
command in ROUTER ISIS mode. To
view the current IPv6 IS-IS configuration, use the
show config
command in ROUTER ISIS-ADDRESS FAMILY IPV6 mode.
Configuring Authentication Passwords
You can assign an authentication password for routers in Level 1 and for routers in Level 2.
Because Level 1 and Level 2 routers do not communicate with each other, you can assign different passwords for Level 1 routers and
for Level 2 routers. However, if you want the routers in the level to communicate with each other, configure them with the same
password.
To configure a simple text password, use the following commands.
• Configure authentication password for an area.
ROUTER ISIS mode
area-password [hmac-md5] password
FTOS supports HMAC-MD5 authentication.
This password is inserted in Level 1 LSPs, Complete SNPs, and Partial SNPs.
• Set the authentication password for a routing domain.
ROUTER ISIS mode
domain-password [ encryption-type | hmac-md5] password
FTOS supports both DES and HMAC-MD5 authentication methods.
This password is inserted in Level 2 LSPs, Complete SNPs, and Partial SNPs.
To view the passwords, use the
show config
command in ROUTER ISIS mode or the
show running-config isis
command in EXEC Privilege mode.
Intermediate System to Intermediate System
461