Dell S4048-ON, Руководство по настройке

Страница: 753 / 1039

•
ip ssh hostbased-authentication enable
: enable host-based authentication for the SSHv2 server.
•
ip ssh key-size
: configure the size of the server-generated RSA SSHv1 key.
•
ip ssh password-authentication enable
: enable password authentication for the SSH server.
•
ip ssh pub-key-file
: specify the file the host-based authentication uses.
•
ip ssh rhostsfile
: specify the rhost file the host-based authorization uses.
•
ip ssh rsa-authentication enable
: enable RSA authentication for the SSHv2 server.
•
ip ssh rsa-authentication
: add keys for the RSA authentication.
• show crypto : display the public part of the SSH host-keys.
•
show ip ssh client-pub-keys
: display the client public keys used in host-based authentication.
•
show ip ssh rsa-authentication
: display the authorized-keys for the RSA authentication.
Dell#copy scp: flash:
Address or name of remote host []: 10.10.10.1
Port number of the server [22]: 99
Source file name []: test.cfg
User name to login remote host: admin
Password to login remote host:
Removing the RSA Host Keys and Zeroizing Storage
Use the
crypto key zeroize rsa
command to delete the host key pairs, both the public and private key information for RSA 1
and or RSA 2 types. Note that when FIPS mode is enabled there is no RSA 1 key pair. Any memory currently holding these keys is
zeroized (written over with zeroes) and the NVRAM location where the keys are stored for persistence across reboots is also
zeroized.
To remove the generated RSA host keys and zeroize the key storage location, use the
crypto key zeroize rsa
command in
CONFIGURATION mode.
Dell(conf)#crypto key zeroize rsa
Configuring When to Re-generate an SSH Key
You can configure the time-based or volume-based rekey threshold for an SSH session. If both threshold types are configured, the
session rekeys when either one of the thresholds is reached.
To configure the time or volume rekey threshold at which to re-generate the SSH key during an SSH session, use the
ip ssh
rekey
[
time
rekey-interval ] [
volume rekey-limit
] command. CONFIGURATION mode.
Configure the following parameters:
• rekey-interval: time-based rekey threshold for an SSH session. The range is from 10 to 1440 minutes. The default is 60 minutes.
• rekey-limit : volume-based rekey threshold for an SSH session. The range is from 1 to 4096 to megabytes. The default is 1024
megabytes.
Examples
The following example configures the time-based rekey threshold for an SSH session to 30 minutes.
Dell(conf)#ip ssh rekey time 30
The following example configures the volume-based rekey threshold for an SSH session to 4096 megabytes.
Dell(conf)#ip ssh rekey volume 4096
Security
753