manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 738

cannot be verified. Only the console port behaves this way, and does so to ensure that users are not locked out of the system if 
network-wide issue prevents access to these servers.

1.

Define an authentication method-list (

method-list-name

) or specify the default.

CONFIGURATION mode

aaa authentication login {

method-list-name

 | default} 

method1

 [

... method4

]

The default method-list is applied to all terminal lines.

Possible methods are:
•

enable

: use the password you defined using the 

enable secret

 or 

enable password

 command in 

CONFIGURATION mode.

•

line

: use the password you defined using the 

password

 command in LINE mode.

•

local

: use the username/password database defined in the local configuration.

•

none

: no authentication.

•

radius

: use the RADIUS servers configured with the radius-server host command.

•

: use the servers configured with the 

tacacs-server host

 command.

2.

Enter LINE mode.
CONFIGURATION mode

line {aux 0 | console 0 | vty 

number

 [

... end-number

]}

3.

Assign a 

method-list-name

 or the default list to the terminal line.

LINE mode

login authentication {

method-list-name

 | default}

To view the configuration, use the 

show config

 command in LINE mode or the 

show running-config

 in EXEC Privilege 

mode.

NOTE: Dell Networking recommends using the 

none

 method only as a backup. This method does not authenticate users. 

The 

none

 and 

enable

 methods do not work with secure shell (SSH).

You can create multiple method lists and assign them to different terminal lines.

Enabling AAA Authentication

To enable AAA authentication, use the following command.

•

Enable AAA authentication.
CONFIGURATION mode

aaa authentication enable {

method-list-name

 | default} 

method1

 [

... method4

]

–

default

: uses the listed authentication methods that follow this argument as the default list of methods when a user logs 

in.

–

method-list-name

: character string used to name the list of enable authentication methods activated when a user logs 

in.

–

method1

 [

... method4

]

: any of the following: RADIUS, TACACS, enable, line, none.

If you do not set the default list, only the local enable is checked. This setting has the same effect as issuing an 

aaa 

authentication enable default enable

 command.

Enabling AAA Authentication — RADIUS

To enable authentication from the RADIUS server, and use TACACS as a backup, use the following commands.

1.

Enable RADIUS and set up TACACS as backup.

738

Security

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды