Dell S4048-ON, Руководство по настройке

Страница: 487 / 1039

station-move-violation shutdown-offending
• Shut down both the first and second port to learn the MAC address.
INTERFACE mode
station-move-violation shutdown-both
• Display a list of all of the interfaces configured with MAC learning limit or station move violation.
CONFIGURATION mode
show mac learning-limit violate-action
NOTE: When the MAC learning limit (MLL) is configured as
no-station-move
, the MLL will be processed as static
entries internally. For static entries, the MAC address will be installed in all port-pipes, irrespective of the VLAN
membership.
Recovering from Learning Limit and Station Move Violations
After a learning-limit or station-move violation shuts down an interface, you must manually reset it.
To reset the learning limit, use the following commands.
NOTE: Alternatively, you can reset the interface by shutting it down using the shutdown command and then re-enabling
it using the
no shutdown
command.
• Reset interfaces in the ERR_Disabled state caused by a learning limit violation or station move violation.
EXEC Privilege mode
mac learning-limit reset
• Reset interfaces in the ERR_Disabled state caused by a learning limit violation.
EXEC Privilege mode
mac learning-limit reset learn-limit-violation [interface | all]
• Reset interfaces in the ERR_Disabled state caused by a station move violation.
EXEC Privilege mode
mac learning-limit reset station-move-violation [interface | all]
NIC Teaming
NIC teaming is a feature that allows multiple network interface cards in a server to be represented by one MAC address and one IP
address in order to provide transparent redundancy, balancing, and to fully utilize network adapter resources.
The following illustration shows a topology where two NICs have been teamed together. In this case, if the primary NIC fails, traffic
switches to the secondary NIC because they are represented by the same set of addresses.
Layer 2
487