manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 241

13

Data Center Bridging (DCB)

 

Ethernet Enhancements in Data Center Bridging

The following section describes DCB.

The S4048–ON system supports loading two 

DCB_Config

 files: 

FCoE_DCB_Config

 and 

iSCSI_DCB_Config

.

These files are located in the root directory flash:/CONFIG_TEMPLATE. After copying the configuration files to the startup config

 

and reloading the system.

The device supports the following DCB features:

•

Data center bridging exchange protocol (DCBx)

•

Priority-based flow control (PFC)

•

Enhanced transmission selection (ETS)

To configure PFC, ETS, and DCBx for DCB, refer to 

Sample DCB Configuration

 for the CLI configurations.

DCB refers to a set of IEEE Ethernet enhancements that provide data centers with a single, robust, converged network to support 
multiple traffic types, including local area network (LAN), server, and storage traffic. Through network consolidation, DCB results in 
reduced operational cost, simplified management, and easy scalability by avoiding the need to deploy separate application-specific

 

networks.

For example, instead of deploying an Ethernet network for LAN traffic, include additional storage area networks (SANs) to ensure 
lossless Fibre Channel traffic, and a separate InfiniBand network for high-performance inter-processor computing within server 
clusters, only one DCB-enabled network is required in a data center. The Dell Networking switches that support a unified fabric and 
consolidate multiple network infrastructures use a single input/output (I/O) device called a converged network adapter (CNA).

A CNA is a computer input/output device that combines the functionality of a host bus adapter (HBA) with a network interface 
controller (NIC). Multiple adapters on different devices for several traffic types are no longer required.

Data center bridging satisfies the needs of the following types of data center traffic in a unified fabric:

Traffic

Description

LAN traffic

LAN traffic consists of many flows that are insensitive to latency requirements, while certain applications, 
such as streaming video, are more sensitive to latency. Ethernet functions as a best-effort network that may 
drop packets in the case of network congestion. IP networks rely on transport protocols (for example, TCP) 
for reliable data transmission with the associated cost of greater processing overhead and performance 
impact LAN traffic consists of a large number of flows that are generally insensitive to latency requirements, 
while certain applications, such as streaming video, are more sensitive to latency. Ethernet functions as a 
best-effort network that may drop packets in case of network congestion. IP networks rely on transport 
protocols (for example, TCP) for reliable data transmission with the associated cost of greater processing 
overhead and performance impact.

Storage traffic

Storage traffic based on Fibre Channel media uses the Small Computer System Interface (SCSI) protocol for 
data transfer. This traffic typically consists of large data packets with a payload of 2K bytes that cannot 
recover from frame loss. To successfully transport storage traffic, data center Ethernet must provide no-
drop service with lossless links.

Data Center Bridging (DCB)

241

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды