Dell S4048-ON, Руководство по настройке

Страница: 831 / 1039

1/1 1/1 10 up up
1/2 1/2 10 up up
1/3 1/3 10 up up
Add Units to an Existing Stack
You can add units to an existing stack in one of three ways.
• By manually assigning a new unconfigured unit a position in an existing stack.
• By adding a configured unit to an existing stack.
• By merging two stacks.
If you are adding units to an existing stack, you can either:
• allow Dell Networking OS to automatically assign the new unit a position in the stack, or
• manually determine each units position in the stack by configuring each unit to correspond with the stack before connecting it.
• If you add a unit that has a stack number that conflicts with the stack, the stack assigns the first available stack number.
• If the stack has a provision for the stack-number that will be assigned to the new unit, the provision must match the unit type, or
Dell Networking OS generates a type mismatch error.
After the new unit loads, it synchronizes its running and startup configurations with the stack.
Manually Assigning a New Unit to an Existing Stack
To manually assign a new unit a position in an existing stack, use the following steps.
1. On the stack, determine the next available stack-unit number, and the management priority of the management unit.
EXEC Privilege mode
show system brief
or
show system stack-unit
2. On the new unit, number it the next available stack-unit number.
EXEC Privilege mode
stack-unit stack-unit-number renumber stack-unit-new-number
3. (OPTIONAL) On the new unit, assign a management priority based on whether you want the new unit to be the stack manager.
CONFIGURATION mode
stack-unit stack-unit-number priority priority-number
4. Assign a stack group to each unit.
CONFIGURATION mode
stack-unit stack-unit-number stack-group stack-group-number
5. Connect the new unit to the stack using stacking cables.
Example of Adding a Stack Unit with a Conflicting Stack Number (Before and After)
The following example shows adding a stack unit with a conflicting stack number (before).
Dell#show system brief
Stack MAC : 00:01:e8:8a:df:e6
Reload Type : normal-reload
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
-------------------------------------------------------------
1 Management online S4048-ON S4048-ON 9-8-0-0 64
2 Member not present
3 Member not present
Stacking
831