manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 562

Preventing a Source from Registering with the RP

To prevent the PIM source DR from sending register packets to RP for the specified multicast source and group, use the following 
command. If the source DR never sends register packets to the RP, no hosts can ever discover the source and create a shortest 
path tree (SPT) to it.

•

Prevent a source from transmitting to a particular group.
CONFIGURATION mode

ip pim register-filter

In the following example, Source 1 and Source 2 are both transmitting packets for groups 239.0.0.1 and 239.0.0.2. R3 has a PIM 
register filter that only permits packets destined for group 239.0.0.2. An entry is created for group 239.0.0.1 in the routing table, but 
no outgoing interfaces are listed. R2 has no filter, so it is allowed to forward both groups. As a result, Receiver 1 receives only one 
transmission, while Receiver 2 receives duplicate transmissions.

Figure 99. Preventing a Source from Transmitting to a Group

The following table lists the location and description shown in the previous illustration.

562

Multicast Features

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды