manualshive.com logo in svg

Dell S4048-ON, Руководство по настройке

Поделиться
Скачать
Dell S4048-ON Скачать руководство пользователя страница 326

--  Power Supplies  --

Unit   Bay   Status       Type    FanStatus   FanSpeed(rpm)   Power Usage (W)

-----------------------------------------------------------------------------

  0     0    up           UNKNOWN up           3536              0.0

  0     1    up           UNKNOWN up           3504              0.0

  0     2    up           UNKNOWN up           3440              0.0

  0     3    up           UNKNOWN up           3440              0.0

Total power:     0.0 W

--  Fan  Status  --

Unit   Bay   TrayStatus  Fan0    Speed   Fan1    Speed   

------------------------------------------------------------------------------------

  0     0     absent      

  0     1     absent      

  0     2     absent      

  0     3     absent      

  0     4     absent      

Speed in RPM

        

Current BootSelector-Boot: Backup BIOS

Disabling FIPS Mode

When you disable FIPS mode, the following changes occur:

•

The SSH server disables.

•

All open SSH and Telnet sessions, as well as all SCP and FTP file transfers, close.

•

Any existing host keys (both RSA and RSA1) are deleted from system memory and NVRAM storage.

•

FIPS mode disables.

•

The SSH server re-enables.

•

The Telnet server re-enables (if it is present in the configuration).

•

New 1024–bit RSA and RSA1 host key-pairs are created.

To disable FIPS mode, use the following command.

•

To disable FIPS mode from a console port.
CONFIGURATION mode

no fips mode enable

The following Warning message displays:

WARNING: Disabling FIPS mode will close all SSH/Telnet connections, restart those 

servers, and destroy

all configured host keys.

Proceed (y/n) ?

326

FIPS Cryptography

Содержание S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды