Dell PowerConnect W-Airwave, Руководство пользователя

Страница: 86 / 310

86 | Configuring and Using Device Groups in AirWave Dell PowerConnect W-AirWave 7.4 | User Guide
5. Locate the Encryption area on the Groups > SSIDs page and adjust these settings as required. Table 58
describes the settings and default values.
6. Locate the EAP Options area on the Groups > SSIDs page, and complete the settings. Table 59 describes the
settings and default values.
7. Locate the RADIUS Authentication Servers area on the Groups > SSIDs configuration page and define the
settings. Table 60 describes the settings and default values.
8. Select Save when the security settings and configurations in this procedure are complete.
Table 58
Groups > SSIDs > Encryption Section Field and Default Values
Setting Default Description
Encryption Mode No Encryption Drop-down menu determines the level of encryption required for devices to associate
to the APs. The drop-down menu options are as follows. Each option displays
additional encryption settings that must be defined. Complete the associated settings
for any encryption type chosen:
 No Encryption
 Optional WEP—Wired Equivalent Privacy, not PCI compliant as of 2010
 Require WEP—Wired Equivalent Privacy, not PCI compliant as of 2010
 Require 802.1x—Based on the WEP algorithm
 Require Leap—Lightweight Extensible Authentication Protocol
 802.1x+WEP—Combines the two encryption types shown
 802.1x+LEAP—Combines the two encryption types shown
 LEAP+WEP—Combines the two encryption types shown
 Static CKIP—Cisco Key Integrity Protocol
 WPA—Wi-Fi Protected Access protocol
 WPA/PSK—Combines WPA with Pre-Shared Key encryption
 WPA2—Wi-Fi Protected Access 2 encryption
 WPA2/PSK—Combines the two encryption methods shown
 xSec—FIPS-compliant encryption including Layer 2 header info
Table 59
Groups > SSIDs > EAP Options Section Field and Default Value
Setting Default Description
WEP Key Rotation
Interval 120 Time (in seconds) between WEP key rotation on the AP.
Table 60
Groups > SSIDs > RADIUS Authentication Servers Fields and Default Values
Setting Default Description
RADIUS Authentication Server
1-3
(Cisco WLC, Proxim only) None Drop-down menu to select RADIUS Authentication servers previously entered on
the Groups > RADIUS configuration page. These RADIUS servers dictate how
wireless clients authenticate onto the network.
Authentication Profile Name
(Proxim Only) None Sets the Authentication Profile Name for Proxim AP-600, AP-700, AP-2000, AP-
4000.
Authentication Profile Index
(Proxim Only) None Sets the Authentication Profile Index for Proxim AP-600, AP-700, AP-2000, AP-
4000.
NOTE: You may need to return to the Groups > Security configuration page to configure or reconfigure RADIUS servers.