274
| Using VisualRF
Dell PowerConnect W-AirWave 7.4
| User Guide
Deploying APs for Client Location Accuracy
Deploying access points for client location accuracy can be different than deploying access points for capacity.
Follow these guidelines for best results:
Ensure that at least 3 radios can hear each client devices at -85 dBm or below
Ensure that you deploy an access point approximately every 3,500 square feet.
For square or rectangular floor plans ensure access points are deployed on the exterior walls of each floor with
access points in the middle as well.
Refer to
Figure 208
for an example.
Figure 208
Rectangular Floor Plan AP Deployment
Using QuickView to Assess RF Environments
QuickView has four distinct views or entry points: client view, access point view, floor plan view, and network,
campus, and building view.
This section contains the following corresponding topics:
“Viewing a Wireless User's RF Environment” on page
274
“Viewing an AP’s Wireless RF Environment” on page
276
“Viewing a Floor Plan’s RF Environment” on page
277
“Viewing a Network, Campus, Building’s RF Environment” on page
278
Viewing a Wireless User's RF Environment
1. Navigate to Clients > List in AMP.
2. Click the link under the Location column for the user of interest, as shown in
Figure 209
. A QuickView
window of that location opens and indicates the client with a Username label, as shown in
Figure 210
:
Figure 209
Link to user’s thumbnail (the Location column)
Содержание PowerConnect W-Airwave
Страница 1: ...Dell PowerConnect W AirWave 7 4 User Guide ...
Страница 106: ...106 Configuring and Using Device Groups in AirWave Dell PowerConnect W AirWave 7 4 User Guide ...
Страница 256: ...256 Creating Running and Emailing Reports Dell PowerConnect W AirWave 7 4 User Guide ...
Страница 310: ...310 Index Dell PowerConnect W AirWave 7 4 User Guide ...
