Dell PowerConnect W-Airwave, Руководство пользователя

Страница: 116 / 310

116 | Discovering, Adding, and Managing Devices Dell PowerConnect W-AirWave 7.4 | User Guide
AirWave collects basic information about universal devices including name, contact, uptime and location. Once
you have added a universal device, you can view a list of its interfaces on APs/Devices > Manage.
By selecting the pencil icon next to an interface, you can assign it to be non-monitored or monitored as Interface
1 or 2. AirWave collects this information and displays it on the APs/Devices > Monitor page in the Interface
section. AirWave supports MIB-II interfaces and polls in/out byte counts for up to two interfaces. AirWave also
monitors sysUptime.
Assigning Devices to the Ignored Page
A device can be assigned to the Ignored page from the APs/Devices > New page. The advantage of having the
device be designated in this way, as in the case of a device that is temporarily down for a known reason, is that
when you take it off the ignored list, it returns immediately to the location in AMP where it had resided before it
was marked Ignored.

Ignored devices are not displayed in APs/Devices > New if discovered in subsequent scans.

Deleted devices will be listed on the APs/Devices > New if discovered in subsequent scans.
Perform these steps to further process or return an ignored device to a managed status.
1. To view all devices that are ignored, go to the APs/Devices > Ignored page, illustrated in Figure 75 .
Figure 75
APs/Devices > Ignored Page Illustration
This page provides the following information for any ignored device:

device name or MAC address, when known

controller associated with that device

device type

device IP address

LAN MAC address for the LAN on which the device is located

date and time of device discovery
2. To change the device parameters for a given device, select its checkbox and adjust group, folder, monitor, and
manage settings as desired.
3. Select Add to add the device to AirWave so that it appears on the APs/Devices > New list.
4. The Unignore button will either return the device to its regular folder or group, or send it to the APs/
Devices > New page.
Monitoring Devices
This section discusses various device monitoring options and includes the following sections:

Viewing Device Monitoring Statistics

Understanding the APs/Devices > Monitor Pages for All Device Types

Evaluating Radio Statistics for an AP

Monitoring Data for Mesh Devices