Dell PowerConnect W-Airwave, Руководство пользователя

Страница: 111 / 310

Dell PowerConnect W-AirWave 7.4 | User Guide Discovering, Adding, and Managing Devices | 111
7. Go to the APs/Devices > New page to see a full list of the newly discovered devices that the scan detected.
Figure 70 illustrates this page.
Figure 70
APs/Devices > New Page Illustration
What Next?

To authorize one or more devices to a group, see “Authorizing Devices to AirWave from APs/Devices > New
Page” on page 111 .

To delete a device altogether from AirWave, select the corresponding check box for each device, and select
Delete.

Dell PowerConnect W thin APs can have Dell PowerConnect W AP Group specified, and Cisco thin APs can
have LWAPP AP Group specified when they are authorized.
Enabling Cisco Discovery Protocol (CDP)
CDP uses the polling interval configured for each individual Cisco switch or router on the Groups > List page.
AirWave requires read-only access to a router or switch for all subnets that contain wired or wireless devices. The
polling interval is specified on the Group > Basic page.
Authorizing Devices to AirWave from APs/Devices > New Page
Once you have discovered devices on your network, add these devices to a group and specify whether the device is
to be placed in Manage Read/Write or Monitor Only mode. To configure a new group, refer to
“Configuring and
Using Device Groups in AirWave” on page 69 .
In Manage Read/Write mode, AirWave compares the device's current configuration settings with the Group
configuration settings and automatically updates the device's configuration to match the Group policy.
Stop Displays the date and time the scan most recently completed.
Scheduled Displays the scheduled date and time for scans that are scheduled to be run.
Table 71
Device Setup > Discover > Discovery Execution Fields (Continued)
Column Description
NOTE: This page is only visible to users with the AMP Administrator role, or roles that have “Allow authorization of APs/Devices”
enabled in AMP Setup > Roles.