Dell PowerConnect W Airwave 7.1, Руководство пользователя

Страница: 180 / 334

180 | Creating and Using Templates Dell PowerConnect W AirWave 7.1 | User Guide
Table 94 Groups > Templates > Add Template Fields and Default Values
Setting Default Description
Use Global
Template
No Uses a global template that has been previously configured on the
Groups > Templates
configuration
page. Available templates will appear in the drop-down menu. If Yes is selected you can also configure
global template variables. For Symbol devices you can select the groups of thin APs to which the template
should be applied. For more information about global templates see the Groups > Templates section of the
User Guide
.
Fetch None Selects an AP from which to fetch a configuration. The configuration will be turned into a template with
basic AP specific settings like channel and power turned into variables. The variables are filled with the
data on the APs/Devices > Manage configuration page for each AP.
Name None Defines the template display name.
AP Type Cisco IOS (Any
Model)
Determines that the template applies to APs or devices of the specified type. If Cisco IOS (Any Model) is
selected, the template applies to all IOS APs that do not have a version specific template specified.
Reboot APs After
Configuration
Changes
No Determines reboot when AWMS applies the template, copied from the new configuration file to the
startup configuration file on the AP. If No is selected, AWMS uses the AP to merge the startup and running
configurations. If Yes is selected, the configuration is copied to the startup configuration file and the AP is
rebooted.
NOTE: This field is only visible for some devices.
Restrict to this
version
No Restricts the template to APs of the specified firmware version. If Yes is selected, the template only
applies to APs on the version of firmware specified in the Template Firmware Version field.
Template firmware
version
None Designates that the template only applies to APs running the version of firmware specified.
Community String None If the template is updating the community strings on the AP, enter the new community string AWMS should
use here. AWMS updates the credentials it is using to communicate to the device after the device has
been managed.
Telnet/SSH
Username
None If the template is updating the Telnet/SSH Username on the AP, enter the new username AWMS should
use here. AWMS updates the credentials it is using to communicate to the device after the device has
been managed.
Telnet/SSH
Password
None If the template is updating the Telnet/SSH password on the AP, enter the new Telnet/SSH password
AWMS should use here. AWMS updates the credentials it is using to communicate to the device after the
device has been managed.
"enable" Password None If the template is updating the enable password on the AP, enter the new enable password AWMS should
use here. AWMS updates the credentials it is using to communicate to the device after the device has
been managed.
SNMPv3 Username None If the template is updating the SNMP v3 Username password on the AP, enter the new SNMP Username
password here. AWMS updates the credentials it is using to communicate to the device after the device
has been managed.
Auth Password None If the template is updating the SNMP v3 Auth password on the AP, enter the new SNMP Username
password here. AWMS updates the credentials it is using to communicate to the device after the device
has been managed.
Privacy Password None If the template is updating the SNMP v3 Privacy password on the AP, enter the new SNMP Username
password here. AWMS updates the credentials it is using to communicate to the device after the device
has been managed.
SNMPv3 Auth
Protocol
MD5 Specifies the SNMPv3 Auth protocol, either MD5 or SHA-1.
SNMPv3 Privacy
Protocol
DES Specifies the SNMPv3 Privacy protocol, either DES or AES.