Dell PowerConnect W Airwave 7.1, Руководство пользователя

Страница: 46 / 334

46 | Configuring AWMS Dell PowerConnect W AirWave 7.1 | User Guide
10. Click Save when the General Server settings are complete and whenever making subsequent changes.
What Next?

Navigate to additional tabs in the AMP Setup section to continue additional setup configurations.

Complete the required configurations in this chapter prior to proceeding to ensuing chapters of this document.
Dell support remains available to you for any phase of AWMS installation.
Maximum Number of
Configuration
Processes
5 Increases the number of processes that are pushing configurations to your
devices, as an option. The optimal setting for your network depends on the
resources available, especially RAM. Please contact Dell support if you think
you might need to increase this setting for your network.
Maximum Number of
Audit Processes
3 Increases the number of processes that audit configurations for your devices,
as an option. The optimal setting for your network depends on the resources
available, especially RAM. Contact Dell support if you are considering
increasing this setting for your network.
Verbose Logging of
SNMP Configuration
No Enables or disables logging detailed records of SNMP configuration
information.
SNMP Rate Limiting
for Monitored
Devices
No Enables or disables a maximum bandwidth consumption threshold for each port
for monitored devices. This setting prevents unnecessary SNMP traffic from
compromising device performance. Aruba recommends enabling this setting
when monitoring Aruba controllers.
RAPIDS Processing
Priority
Low Defines the processing and system resource priority for RAPIDS in relation to
AWMS
as a whole.
When
AWMS
is processing data at or near its maximum capacity, reducing the
priority of RAPIDS can ensure that processing of other data (such as client
connections and bandwidth) are not adversely impacted.
The default priority is Low. You can also tune your system performance by
changing group poll periods.
Table 15 AMP Setup > General > Performance Tuning Fields and Default Values (Continued)
Setting Default Description