Dell PowerConnect W Airwave 7.1, Руководство пользователя

Страница: 150 / 334

150 | Discovering, Adding, and Managing Devices Dell PowerConnect W AirWave 7.1 | User Guide
Configuration Good means all the settings on the AP agree with the settings AWMS wants them to have. Mismatched
means there is a configuration mismatch between what is on the AP and what AWMS wants to push to the
AP. The Mismatched link directs you to this specific APs/Devices > Audit page where each mismatch is
highlighted.
Firmware Displays the firmware version running on the AP.
Controller Displays the controller for the associated AP device. Click the controller name hyperlink to display the
APs/Devices > Monitor page, which contains detailed controller information. Controller information
includes Status, operational metrics, Controller Client Count by SSID, Controller Bandwidth by SSID, CPU
Utilization, Memory Utilization, APs Managed by this Controller, Alerts, and Recent Events. Figure 98
illustrates the Controller page.
Portal
a
Specifies the mesh AP acting as the wired connection to the network for this mesh AP.
Mesh Mode
b
Specifies whether the AP is a portal device or a mesh AP. The portal device is connected to the network
over a wired connection. A mesh AP is a device downstream of the portal that uses wireless connections
to reach the portal device.
Hop Count
c
Displays the number of mesh links between this AP and the portal.
Type Displays the make and model of the access point.
Last Polled Displays the most recent time AWMS has polled the AP for information. The polling interval can be set on
the Groups > Basic page.
Uptime Displays the amount of time since the AP has been rebooted. This is the amount of time the AP reports and
is not based on any connectivity with AWMS.
LAN MAC Address Displays the MAC address of the Ethernet interface on the device.
Serial Displays the serial number of the device.
Radio Serial Displays the serial number of the radios in the device.
NOTE: This field is not available for all APs.
Antenna Type Indicates internal or external radio. For devices where antenna type is defined per AP, including Aruba
devices, the same antenna type will be listed for each radio.
Radio Transmit
Power
Some devices report transmit power reduction rather than transmit power; no value is reported for those
devices.
Location Displays the SNMP location of the device.
Contact Displays the SNMP contact of the device.
IP Displays the IP address that AWMS uses to communicate to the device. This number is also a link to the AP
web interface. When the link is moused over a pop-up menu will appear allowing you to http, https, telnet
or SSH to the device.
SSID Displays the SSID of the primary radio.
Total Users Displays the total number of users associated to the AP regardless of which radio they are associated to,
at the time of the last polling.
First Radio Displays the Radio type of the first radio (802.11a, 802.11b or 802.11g).
Second Radio Displays the Radio type of the second radio (802.11a, 802.11b or 802.11g.
Channel Displays the channel of the corresponding radio.
Users Displays the number of users associated to the corresponding radio at the time of the last polling.
Bridge Links Displays the number of bridge links for devices that are point-to-multi-point (see the Groups > PTMP/
WiMAX page for more details).
Mesh Links
d
Displays the total number of mesh links to the device including uplinks and downlinks.
Table 82 APs/Devices > Monitor > General Fields and Default Values (Continued)
Field Description