Dell PowerConnect W Airwave 7.1, Руководство пользователя

Страница: 115 / 334

Dell PowerConnect W AirWave 7.1 | User Guide Configuring and Using Device Groups in AWMS | 115
6. To configure subscriber station classes, click the Configure subscriber station classes link on the Groups >
PTMP/Wimax configuration page. Subscriber station classes link packet identification rules and service flow
classes. Figure 64 illustrates this page and Table 74 describes the settings and default values.
Figure 64 Groups > PTMP/WiMAX Configuring Subscriber Station Classes Page Illustration
7. Click Save and Apply when configurations are complete and to push this configuration to controllers, or click
Save to retain these settings prior to pushing to controllers at a later time.
Table 73 Groups > PTMP/WiMAX Configure Service Flow Classes Fields and Default Values
Setting Default Description
Name None Text field defines the name of the Service Flow Class. The name should be meaningful
and descriptive. The name is used to define the subscriber station class.
Scheduling Type Best Effort Drop-down menu specifies the scheduling priority for the Service Flow Class. There are
two options as follows:

Best Effort—Maximum sustained data rate and traffic priority

Unsolicited Grant Service—Maximum sustained data rate, maximum latency and
tolerable jitter.
Service Flow
Direction
Uplink Defines the direction of the service.
Maximum
Sustained Data
Rate (in Kbps)
0 Sets the maximum sustained data rate for this service class. The base station does not
allow the data rate to exceed this value.
Traffic Priority (0-
7)
7 Sets the priority of the traffic from 0 - 7 with 7 getting the highest priority.
Table 74 Groups > PTMP/WiMAX Configuring Subscriber Station Classes Fields and Default Values
Setting Default Description
Name None Text field that defines the name of the Subscriber Station Class. The name
should be meaningful and descriptive.
VLAN Mode Transparent Defines the VLAN mode.
Service Flows None Checkbox field that defines the service flow classes that apply to this
Subscriber Station Class.
Packet Identification Rules None Define the priority for all of the packet identification rules.