Dell PowerConnect W Airwave 7.1, Руководство пользователя

Страница: 291 / 334

Dell PowerConnect W AirWave 7.1 | User Guide Creating, Running, and Emailing Reports | 291
By default all data will be included. Deselect the checkbox to hide specific information. The list can also be
reordered by dragging and dropping the separate lines. The order displayed here will match the column order in
the report.
3. Do one of the following:

Click Add and Run to generate the report immediately, in addition to saving report settings.

Click Run Now to generate the report immediately without creating a new report definition or saving the
report settings.

Click Add ( only) to complete the report creation, to be run at the time scheduled.

Click Cancel to exit from the Add page.
Table 143 describes the configurable settings for the custom report to be created. Click any of the report names
to view additional information on that report type.
Table 143 Report Types and Scheduling Options Supported for Custom Reports
Report Type
Can by Run by
Time Period
Can be Run by
Group/Folder
Description
Using Custom
Reports
Yes Yes Summarizes devices based on which have exceeded a
defined percentage of their maximum bandwidth capacity.
Pulls data for AP radios or interfaces of universal devices
(ifSpeed value).
Using the Capacity
Planning Report
Yes Yes Tracks bandwidth capacity and consumption according to
thresholds for data throughput. This is a device-oriented
report.
Using the
Configuration Audit
Report
No Yes Provides a snapshot of the configuration of all specified
access points in AWMS, at report run time.
Using the Device
Summary Report
Yes Yes Summarizes user and bandwidth statistics and lists devices
in AWMS.
Using the Device
Uptime Report
Yes Yes Summarizes device uptime within defined groups or
folders.
Using the IDS
Events Report
Yes Yes Summarizes IDS events; can be limited to a summary of a
certain number of events.
Using the Inventory
Report
No Yes Provides an audit of vendors, models and firmware
versions of devices in AWMS.
Using the Memory
and CPU Usage
Report
Yes Yes Summarizes usage for controllers for defined top number of
devices; can be run with or without per-CPU details and
details about device memory usage.
Using the Network
Usage Report
Yes Yes Summarizes bandwidth data and number of users.
Using the New
Rogue Devices
Report
Yes No Shows new rogue devices by score, discovering AP, and
MAC address vendor.
Using the New
Users Report
Yes No Provides a summary list of new users, including username,
role, MAC address, discovering AP, and association time.
Using the PCI
Compliance Report
Yes Yes Provides a summary of network compliance with PCI
requirements, according to the PCI requirements enabled
in AWMS using the
AWMS
Setup > PCI Compliance page.