Dell IDRAC6, Руководство пользователя

Страница: 44 / 472

44
Configuring iDRAC6 Enterprise
• Chassis LCD Panel — See the
Dell Chassis Management Controller
Firmware User Guide
• iDRAC6 Configuration Utility — See "Using iDRAC6 Configuration
Utility"
• CMC Web interface — See "Configuring Networking Using the CMC
Web Interface"
• Remote and local RACADM — See "cfgLanNetworking"
Configure iDRAC6 Users
Set up the local iDRAC6 users and permissions. iDRAC6 holds a table of
sixteen local users in firmware. You can set usernames, passwords, and roles
for these users.
NOTE:
< , > , and \ are not allowed in usernames or passwords.
• iDRAC6 Configuration Utility (configures administrative user only) —
See "LAN User Configuration"
• iDRAC6 Web interface — See "Adding and Configuring iDRAC6 Users"
• Remote and local RACADM — See "Adding an iDRAC6 User"
NOTE:
When using iDRAC6 in an Active Directory environment, the user names you
create must conform to the Active Directory naming convention in force.
Configure Active Directory
In addition to the local iDRAC6 users, you can use Microsoft
®
Active
Directory
®
to authenticate iDRAC6 user logins.
For more information, see "Using iDRAC6 With Microsoft Active Directory."
NOTE:
When using iDRAC6 in an Active Directory environment, be sure your user
names conform to the Active Directory naming convention in force.
Configure IP Filtering and IP Blocking
In addition to user authentication, you can prevent unauthorized access by
rejecting connection attempts from IP addresses outside of a defined range
and by temporarily blocking connections from IP addresses where
authentication has failed multiple times within a configurable timespan.
• iDRAC6 Web interface — See "Configuring IP Filtering and IP Blocking"