manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 89 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 89

Configuring iDRAC6 Enterprise Using the Web Interface

89

MAC Address 

Displays the Media Access Control (MAC) address that 
uniquely identifies each node in a network. The MAC address 
cannot be changed.

Enable NIC

When checked, indicates that the NIC is enabled and activates 
the remaining controls in this group. When a NIC is disabled, 
all communication to and from iDRAC6 through the network is 
blocked.

The default is 

Unchecked

.

Common Settings

Register iDRAC6 
on DNS

 

Registers iDRAC6 name on the DNS server. 

The default is 

Unchecked

.

DNS iDRAC6 
Name

Displays iDRAC6 name. The default name is idrac-

service_tag

, 

where 

service_tag 

is the service tag number of the Dell server. 

For example: iDRAC-HM8912S.

Use DHCP for 
DNS Domain 
Name

Checked

: Enable acquisition of DNS from DHCP.

Unchecked

: Disable acquisition of DNS from DHCP.

DNS Domain 
Name

The default 

DNS Domain Name

 is blank. When the 

Use DHCP for DNS Domain Name

 checkbox is selected, 

this option is grayed out and the field cannot be modified.

IPv4 Settings

Enabled

Enables (

Checked

) or disables (

Unchecked

) IPv4 protocol 

support. The 

Enable NIC

 option should be checked to activate 

this setting.

DHCP Enable

If 

Checked

, the Server Administrator obtains the IP address for 

iDRAC6 NIC from the DHCP server. It also deactivates the 

IP 

Address

, 

Subnet Mask

, and 

Gateway

 fields.

IP Address

Allows you to enter or edit a static IP address for iDRAC6 NIC. 
To change this setting, deselect the 

DHCP Enable

 option.

Subnet Mask

Allows you to enter or edit a subnet mask for iDRAC6 NIC. To 
change this setting, deselect the 

DHCP Enable

 option.

Gateway 

Allows you to enter or edit a static IPv4 gateway for iDRAC6 
NIC. To change this setting, deselect the 

DHCP Enable

 option.

Table 5-2.

Network Settings 

(continued)

Setting

Description

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов