Dell IDRAC6, Руководство пользователя

Страница: 144 / 472

144
Using iDRAC6 With Microsoft Active Directory
The Step 2 of 4 Active Directory Configuration and Management
screen appears.
9
Select the Active Directory Enabled check box.
10
Select Enable Smart–Card Login to enable Smart–Card login. You are
prompted for a Smart–Card logon during any subsequent logon attempts
using the GUI.
11
Select Enable Single Sign-on if you want to log into iDRAC6 without
entering your domain user authentication credentials, such as user name
and password.
12
Click Add to enter the User Domain Name . Enter the domain name in
the text field, and then click OK . Note that this step is optional. If you
configure a list of user domains, the list will be available in the Web
interface login screen. You can choose from the list, and then you only
need to enter the user name.
13
In the Timeout field, enter the number of seconds you want iDRAC6 to
wait for Active Directory responses.
14
Enter the Domain Controller Server Address . You can enter up to three
Active Directory servers for login processing, but you must configure at
least one server by entering the IP address or the fully qualified domain
name (FQDN). iDRAC6 attempts to connect to each configured server
until a connection is established.
15
Click Next .
The Step 3 of 4 Active Directory Configuration and Management
screen appears.
16
Under Schema Selection , select the Standard Schema Settings check box.
17
Click Next .
The Step 4a of 4 Active Directory Configuration and Management
screen appears.
18
Under Standard Schema Settings , enter the Global Catalog
Server Address(es) .