manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 348 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 348

348

RACADM Subcommand Overview

Synopsis

racadm setniccfg -d 

racadm setniccfg -s [<

ipAddress

> <

netmask

> <

gateway

>]

racadm setniccfg -o [<

ipAddress

> <

netmask

> <

gateway

>]

Description

The 

setniccfg

 subcommand sets iDRAC6 IP address.

•

The 

-d

 option enables DHCP for the NIC (default is DHCP enabled).

•

The 

-s 

option enables static IP settings. The IP address, netmask, and 

gateway can be specified. Otherwise, the existing static settings are used. 
<

ipAddress

>, <

netmask

>, and <

gateway

> must be entered as dot-

separated strings.

racadm setniccfg -s 192.168.0.120 255.255.255.0 

192.168.0.1

•

The 

-o

 option disables the NIC completely. 

<

ipAddress

>

, 

<

netmask

>

, 

and 

<

gateway

>

 must be entered as dot-separated strings.

racadm setniccfg -o 192.168.0.120 255.255.255.0 

192.168.0.1

Output

The 

setniccfg

 subcommand displays an appropriate error message if the 

operation is not successful. If successful, a message is displayed. 

Supported Interfaces

•

Local RACADM

•

Remote RACADM

•

telnet/ssh RACADM

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов