manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 236 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 236

236

Configuring and Using Virtual Media

Installing Operating Systems Using Virtual Media 

This section describes a manual, interactive method to install the operating 
system on your management station that may take several hours to complete. 
A scripted operating system installation procedure using 

Virtual Media

 may 

take fewer than 15 minutes to complete. See "Deploying the Operating 
System" for more information.

1

Verify the following:

•

The operating system installation DVD/CD is inserted in the 
management station’s DVD/CD drive.

•

The local DVD/CD drive is selected.

•

You are connected to the virtual drives.

2

Follow the steps for booting from the virtual media in the "Booting From 
Virtual Media" section to ensure that the BIOS is set to boot from the 
DVD/CD drive from which you are installing.

3

Follow the on-screen instructions to complete the installation.

Using Virtual Media When the Server’s Operating System Is Running

Windows-Based Systems

On Windows systems, the virtual media drives are automounted if they are 
attached and configured with a drive letter. 

Using the virtual drives from within Windows is similar to using your physical 
drives. When you connect to the media using the Virtual Media wizard, 
the media is available at the system by clicking the drive and browsing 
its content.

Linux-Based Systems

Depending on the configuration of the software on your system, the virtual 
media drives may not be automounted. If your drives are not automounted, 
manually mount the drives using the Linux 

mount

 command.

Frequently Asked Questions

Table 14-3 lists frequently asked questions and answers.

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов