Dell IDRAC6 Скачать руководство пользователя

Страница: 224 / 472

224

Configuring the vFlash Media Card for Use With iDRAC6

With the label side facing up, insert the contact-pin end of the SD card
into the card slot on the module.

NOTE:

The slot is keyed to ensure correct insertion of the card.

Press inward on the card to lock it into the slot.

Place the blade back in the chassis.

Removing a vFlash Media Card

To remove the vFlash media, push inward on the card to release it, and pull
the card from the card slot.

Configuring the vFlash Media Card Using iDRAC6
Web Interface

Enabling or Disabling the vFlash Media Card

NOTE:

The

vFlash Enable

check box is displayed only if a vFlash card is present.

If card is not present, the following message displays:

SD Card not inserted. Please insert an SD card of

size greater than 256MB.

Ensure that the vFlash card has been installed.

Open a supported Web browser window.

In the system tree, select

System

Click the

vFlash

tab.

The

vFlash

screen appears.

Select the

vFlash Enable

check box to enable the vFlash Media Card.

Enabling the vFlash will expose the Image file

ManagedStore.IMG

created on the SD card as a USB key of the selected size. vFlash can be
enabled only if a valid

ManagedStore.IMG

image is present on the SD

card. The

ManagedStore.IMG

and

ManagedStore.ID

files seen on the

vFlash GUI page are not visible on the host server's operating system but
are on the SD card. To disable, clear the

vFlash Enable

check box.

Click

Apply

Содержание IDRAC6

























































































































































































































































































































































































































































































Результаты поиска

Содержание IDRAC6

Отзывы:

Похожие инструкции для IDRAC6

Бренды по названию

Популярные бренды

Dell IDRAC6, Руководство пользователя

Результаты поиска

Содержание IDRAC6

Отзывы:

Похожие инструкции для IDRAC6

Бренды по названию

Популярные бренды