Dell IDRAC6 Скачать руководство пользователя страница 95

Страница: 95 / 472

Configuring iDRAC6 Enterprise Using the Web Interface

If the same platform event filter is also configured to perform an action
(such as rebooting the system), the action is performed.

Configuring Platform Event Filters (PEF)

NOTE:

Configure platform event filters before you configure the platform event

traps or e-mail alert settings.

Click

System

, and then click the

Alert Management

tab.

The

Platform Events

screen appears.

Select the

Generate Alert

option beside each event for which you want an

alert to be generated.

NOTE:

You may enable or disable alert generation for all events by selecting or

deselecting the check box next to the

Generate Alert

column heading.

Select the radio button below the action you would like to enable for each
event. You can only select one action for each event.

Click

Apply

NOTE:

The event

Generate Alert

checkbox must be selected in order for an alert

to be sent for that event.

Configuring Platform Event Traps (PET)

NOTE:

You must have

Configure iDRAC

permission to add or enable/disable an

SNMP alert. The following options will not be available if you do not have

Configure

iDRAC

permission.

Ensure that you followed the procedures in "Configuring Platform Event
Filters (PEF)."

Click

System

, and then click the

Alert Management

tab.

The

Platform Events

screen appears.

Click

Trap Settings

The

Trap Settings

screen is displayed.

Configure your PET destination IP address:

Select the

Enabled

check box next to the

Destination Number

you

would like to activate.

Содержание IDRAC6

























































































































































































































































































































































































































































































Результаты поиска

Содержание IDRAC6

Отзывы:

Dell IDRAC6, Руководство пользователя, Страница: 95 / 472

Результаты поиска

Содержание IDRAC6

Отзывы: