manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 294 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 294

294

Deploying Your Operating System Using iVMCLI

Omit this parameter from the command line if you are not virtualizing floppy 
media. If an invalid value is detected, an error message displays and the 
command terminates. 

CD/DVD Device or Image File 

-c {<

device-name

> | <

image-file

>}

where <

device-name

> is a valid CD/DVD drive letter (Windows systems) or 

a valid CD/DVD device file name (Linux systems) and <

image-file

> is the 

file name and path of a valid ISO-9660 image file.

This parameter specifies the device or file that will supply the virtual 
CD/DVD-ROM media: 

For example, an image file is specified as:

-c c:\temp\mydvd.img

 (Windows systems)

-c /tmp/mydvd.img

 (Linux systems)

For example, a device is specified as:

-c d:\

 (Windows systems)

-c /dev/cdrom

 (Linux systems)

Omit this parameter from the command line if you are not virtualizing 
CD/DVD media. If an invalid value is detected, an error message is listed and 
the command terminates. 

Specify at least one media type (floppy or CD/DVD drive) with the 
command, unless only switch options are provided. Otherwise, an error 
message displays and the command terminates and generates an error. 

Version Display

-v

This parameter is used to display the iVMCLI utility version. If no other 
non-switch options are provided, the command terminates without an error 
message.

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов