manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 301 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 301

Using iDRAC6 Configuration Utility

301

Alert Destination 1

if 

LAN Alert Enabled

 is set to 

On

, enter the IP address where 

PET LAN alerts will be forwarded.

IPv4 Settings

Enable or disable support for the IPv4 connection.

IPv4

Select 

Enabled

 or 

Disabled 

IPv4 protocol support.

The default is enabled.

RMCP+ Encryption 
Key 

Press <Enter> to edit the value and <Esc> when finished. 
The RMCP+ Encryption key is a 40-character hexadecimal 
string (characters 0-9, a-f, and A-F). RMCP+ is an IPMI 
extension that adds authentication and encryption to IPMI. 
The default value is a string of 40 0s (zeros). 

IP Address Source

Select between 

DHCP

 and 

Static

. When DHCP is selected, 

the 

Ethernet IP Address

, 

Subnet Mask

, and 

Default Gateway

 

fields are obtained from a DHCP server. If no DHCP server is 
found on the network, the fields are set to zeros. 

When 

Static

 is selected, the 

Ethernet IP Address

, 

Subnet 

Mask

, and 

Default Gateway 

items become editable

. 

Ethernet IP Address If the 

IP Address Source

 is set to 

DHCP

, this field displays the 

IP address obtained from DHCP. 

If the 

IP Address Source

 is set to 

Static

, enter the IP address 

you want to assign to iDRAC6.

The default is 

192.168.0.120

. 

Subnet Mask

If the 

IP Address Source

 is set to 

DHCP

, this field displays the 

subnet mask address obtained from DHCP. 

If the 

IP Address Source

 is set to 

Static

, enter the subnet mask 

for iDRAC6. The default is 

255.255.255.0

.

Default Gateway

If the 

IP Address Source

 is set to 

DHCP

, this field displays the 

IP address of the default gateway obtained from DHCP. 

If the 

IP Address Source

 is set to 

Static

, enter the IP address of 

the default gateway. The default is 

192.168.0.1

.

DNS Servers from 
DHCP

Select 

On

 to retrieve DNS server addresses from a DHCP 

service on the network. Select 

Off

 to specify the DNS server 

addresses below. 

Table 19-1.

LAN Parameters 

(continued)

 

Item

Description

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов