manualshive.com logo in svg

Dell IDRAC6, Руководство пользователя, Страница: 293 / 472

Поделиться
Скачать
Dell IDRAC6 Скачать руководство пользователя страница 293

Deploying Your Operating System Using iVMCLI

293

The <

iDRAC-user-name

> must have the following attributes:

•

Valid user name

•

iDRAC6 Virtual Media User permission

If iDRAC6 authentication fails, an error message displays and the command 
terminates.

iDRAC6 User Password 

-p 

<iDRAC-user-password> 

This parameter provides the password for the specified iDRAC6 user. 

If iDRAC6 authentication fails, an error message displays and the command 
terminates. 

Floppy/Disk Device or Image File 

-f {

<device-name>

 | 

<image-file>

}

where <

device-name

> is a valid drive letter (for Windows systems) or a valid 

device file name, including the mountable file system partition number, if 
applicable (for Linux systems); and <

image-file

> is the filename and path of 

a valid image file.

This parameter specifies the device or file to supply the virtual floppy/disk 
media. 

For example, an image file is specified as:

-f c:\temp\myfloppy.img

 (Windows system)

-f /tmp/myfloppy.img

 (Linux system)

If the file is not write-protected, Virtual Media may write to the image file. 
Configure the operating system to write-protect a floppy image file that 
should not be overwritten. 

For example, a device is specified as:

-f a:\

 (Windows system)

-f /dev/sdb4 # 4th partition on device

 

/dev/sdb

 

(Linux system)

If the device provides a write-protection capability, use this capability to 
ensure that Virtual Media will not write to the media. 

Содержание IDRAC6

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов